ISO-10303-21;
HEADER;
FILE_DESCRIPTION( ('STEP AP242 Edition 2', 'CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufa
cturing Information (PMI)---4.0---2014-10-13', 'CAx-IF Rec.Pracs.---3D Tessellated Geometry---0.4---2014-09-14','2;1', 'CAx-IF Rec.Pracs.---User Defined Attributes---1.5---2016-08-15'), '2;1');
FILE_NAME( 'Right Arm - Part 2 (4)', '2026-05-31T15:23:16Z', (''), (''), 'ST-DEVELOPER v20', 'ONSHAPE BY PTC INC, 1.215', '');
FILE_SCHEMA (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF { 1 0 10303 442 3 1 4 }'));
ENDSEC;
DATA;
#1154=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1155)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#1158,#1157,#1156)) REPRESENTATION_CONTEXT('Part 2','TOP_LEVEL_ASSEMBLY_PART') );
#1155=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-8),#1158, 'DISTANCE_ACCURACY_VALUE','Maximum Tolerance applied to model');
#1156=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#1157=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#1158=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT($,.METRE.) );
#1159=PRODUCT_DEFINITION_SHAPE('','',#1160);
#1160=PRODUCT_DEFINITION('','',#1162,#1161);
#1161=PRODUCT_DEFINITION_CONTEXT('',#1168,'design');
#1162=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','',#1164, .NOT_KNOWN.);
#1163=PRODUCT_RELATED_PRODUCT_CATEGORY('','',(#1164));
#1164=PRODUCT('Part 2','Part 2','Part 2',(#1166));
#1165=PRODUCT_CATEGORY('','');
#1166=PRODUCT_CONTEXT('',#1168,'mechanical');
#1167=APPLICATION_PROTOCOL_DEFINITION('international standard', 'ap242_managed_model_based_3d_engineering',2020,#1168);
#1168=APPLICATION_CONTEXT('managed model based 3d engineering');
ENDSEC;
END-ISO-10303-21;