ISO-10303-21;
HEADER;
FILE_DESCRIPTION( ('STEP AP242 Edition 2', 'CAx-IF Rec.Pracs.---Representation and Presentation of Product Manufa
cturing Information (PMI)---4.0---2014-10-13', 'CAx-IF Rec.Pracs.---3D Tessellated Geometry---0.4---2014-09-14','2;1', 'CAx-IF Rec.Pracs.---User Defined Attributes---1.5---2016-08-15'), '2;1');
FILE_NAME( 'Right Arm - Part 2', '2026-05-31T15:23:16Z', (''), (''), 'ST-DEVELOPER v20', 'ONSHAPE BY PTC INC, 1.215', '');
FILE_SCHEMA (('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF { 1 0 10303 442 3 1 4 }'));
ENDSEC;
DATA;
#1668=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1669)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#1672,#1671,#1670)) REPRESENTATION_CONTEXT('Part 2','TOP_LEVEL_ASSEMBLY_PART') );
#1669=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-5),#1672, 'DISTANCE_ACCURACY_VALUE','Maximum Tolerance applied to model');
#1670=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#1671=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#1672=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT($,.METRE.) );
#1673=PRODUCT_DEFINITION_SHAPE('','',#1674);
#1674=PRODUCT_DEFINITION('','',#1676,#1675);
#1675=PRODUCT_DEFINITION_CONTEXT('',#1682,'design');
#1676=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('','',#1678, .NOT_KNOWN.);
#1677=PRODUCT_RELATED_PRODUCT_CATEGORY('','',(#1678));
#1678=PRODUCT('Part 2','Part 2','Part 2',(#1680));
#1679=PRODUCT_CATEGORY('','');
#1680=PRODUCT_CONTEXT('',#1682,'mechanical');
#1681=APPLICATION_PROTOCOL_DEFINITION('international standard', 'ap242_managed_model_based_3d_engineering',2020,#1682);
#1682=APPLICATION_CONTEXT('managed model based 3d engineering');
ENDSEC;
END-ISO-10303-21;